Cadence Flash F200-2 Guia de Resolução de Problemas Página 408

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 407
408 VGMC and Signaling Server configuration files
IP parameter control
Adjust the timing of the IP Phone jitter buffer resynchronization mechanism
by adding the following lines. The parameter earlyResync has a
default value of 2000 milliseconds; lateResync has a default of 60000
milliseconds.
[IP Params]
earlyResync=
lateResync=
TPS control
Modify the parameters of the election process for the VGMC node master
by adding the following lines to the TPS.INI file. The default for each
parameter appears in parenthesis.
ElectionDuration controls the length of time to wait for responses to an
election request (2 seconds).
ElectionResult defines how often the Master notifies the other cards in the
node of its existence (30 seconds).
ElectionTerm defines how long the nonmasters wait to obtain the Master
broadcast (35 seconds).
Port defines the UDP port for the election communications (16543).
MaxTerminals defines the maximum number of terminals allowed to
register on the card (by default: SMC with 32 channels: 128). Change the
MaxTerminals value to change when the card notifies the Master that it
cannot accept another IP Phone registration. Use care when you change
this value. You cannot use one value across a node with mixed card types
unless you want to restrict all cards to the same capacity.
[TPS Node]
ElectionDuration=
ElectionResult=
ElectionTerm=
Port=
MaxTerminals=
Keymap download control
You can add two parameters to the TPS.INI file to modify the timing of the
keymap download process. Both parameters are used in a calculation
that determines how quickly requests are sent to the CS 1000 for keymap
downloads. The default for each parameter appears in parentheses.
Nortel Communication Server 1000
Troubleshooting Guide for Distributors
NN43001-730 02.02 31 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
.
Vista de página 407
1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 503 504

Comentários a estes Manuais

Sem comentários