Cadence Flash F200-2 Guia de Resolução de Problemas descarregar pdf (Página 211)

100

101

VoIP command reference 211

nodeTempPwdClear value = 0 = 0x0 VGMC> nodePwdShow value

= 0 = 0x0 VGMC> NodeID PwdEna Pwd TmpPwd Uses TimeOut

====== ====== ============== ============== =====

================= 555 Yes 12345678 0d 0h 0m 0s

NVRClear

Syntax:

NVRClear

Erase the VGMC ELAN IP data and Leader flag and returns the shell

logon and shell timeout to the default values. This command applies

only to the VGMCs. Use caution with this command because the card

appears as a Follower, but you do not require a BOOTP request. Use the

clearLeader command to return a Leader card to Follower status or the

command shellTi to reset the shell password. If you use the NVRClear

command to clean up the NVRAM, follow it with the clearLeader or

setLeader command.

VGMC> NVRIPShow IP address : 192.168.1.14 Gateway :

192.168.1.1 Subnet Mask: 255.255.255.128 Set as Leader.

Set to use IP address parameters in NVRAM. value = 43 = 0x2b =

’+’ VGMC> NVRClear value = 0 = 0x0 VGMC> NVRIPShow IP address

: 255.255.255.255 Gateway : 0.0.0.0 Subnet Mask: 0.0.0.0

Set as Follower. Warning : Set as Follower, but will boot

using IP parameters in NVRAM instead of bootp. value = 88 =

0x58 = ’X’

NVRGWSet

Syntax:

NVRGWSet "gwIPaddr"

Assign the card ELAN gateway IP address in the NVRAM. This command

applies only to the VGMCs.

NVRIPSet

Syntax:

NVRIPSet "IPaddr"

Assign the card ELAN IP address in the NVRAM. This command applies

only to the VGMCs.

NVRIPShow

Syntax:

NVRIPShow

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 503 504

Comentários a estes Manuais

Sem comentários

Cadence Flash F200-2 Guia de Resolução de Problemas Página 211

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores aúdio para automóveis Cadence Flash F200-2