
404 VGMC and Signaling Server configuration files
SW_GateKeeper=0
SW_SetTPS=1
[ApplicationServer_47.11.255.33]
HostName=
H323ID=bvw_lab_node_5
SW_VtrkTPS=0
SW_GateKeeper=0
SW_SetTPS=1
[SNTP Server]
Mode=active
Interval=256
Port=20555
[SNTP Client]
Mode=passive
Interval=256
Port=20555
ServerIP=0.0.0.0
[OM Thresholds]
PacketLoss=10
Latency=250
Jitter=30
PollingPeriod=5
CallServerReporting=1
The network time client/server moved from the TPS.INI file to the EM
created CONFIG.INI file. The following parameters are available:
• Mode — defines the mode of the server operation as follows:
— active — sends broadcast of time at defined intervals.
— passive — waits for query from clients (default)
—
disabled — time server not started
• Interval — assigns the interval between time updates and can be set
to any 2n value (31 > n > 0) (256)
• Port — assigns the UDP port used by the time client/server (20,000
+ node ID)
BOOTP.TAB
The BOOTP.TAB file is present on all VGMC and Signaling Servers in
the node. This file contains the node properties. The file is fully parsed
on card reset. It is also parsed when the file is transferred by EM. In
Nortel Communication Server 1000
Troubleshooting Guide for Distributors
NN43001-730 02.02 31 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
.
Comentários a estes Manuais