Cadence Flash F200-2 Guia de Resolução de Problemas Página 284

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 283
284 VoIP
Table 77
Command parameters
Parameter Value Description
trace_output
1–4
Trace output destination, where
1 = TTY
2 = SYSLOG
3 = File
4 = File and TTY
file_pathname "string"
File to output to if trace_output = 3 or 4.
You can enter the entire path name or only the file
name. If you enter only the file name, the default
path is C:/file_name. Enclose the string in quotation
marks.
The following example shows command output.
-> usiTraceSetOutput 1, "/C:/trace.txt"
value =0=0x0
usiLibTraceOff
Syntax:
usiLibTraceOff "ipAddr"
This command turns off the trace for the specified IP Address of a
telephone.
The following example shows command output.
-> usiLibTraceOff "47.11.213.216"
value =0=0x0
usiLibTraceAllOff
Syntax:
usiLibTraceAllOff
This command turns off the trace for all IP addresses (for all telephones).
usiLibTraceOn
Syntax:
usiLibTraceOn "ipAddr" , to_set, from_set
Turn on the trace for one telephone.
The following table describes the command parameters.
Nortel Communication Server 1000
Troubleshooting Guide for Distributors
NN43001-730 02.02 31 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
.
Vista de página 283
1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 503 504

Comentários a estes Manuais

Sem comentários