Cadence Flash F200-2 Guia de Resolução de Problemas descarregar pdf (Página 160)

100

101

160 VoIP

value = 0 = 0x0

-> isetCount "state == busy && type != i2004"

IP Phone Count = 1

value = 0 = 0x0

-> isetCount "fwvsn >= 0602b30"

IP Phone Count = 3

value = 0 = 0x0

-> isetCount "ip < 47.11.254.12"

IP Phone Count = 1

value = 0 = 0x0

-> isetCount "fwvsn <= 0602b39"

IP Phone Count = 3

value = 0 = 0x0

isetGet

Syntax:

isetGet "expressionString"

This command uses one string parameter that is a sequence of

expression, linked by &&. Each expression consists of three parts:

opcode1, operator and opcode2. Currently, only the following operators

are handled: ==, !=, <, >, <=, and >=. opcode1 must be one of the fields in

the isetShow command output, opcode2 must be a well-formatted value,

the format depends on opcode1. Both opcode1 and opcode2 are not

case-sensitive.

For use "NAT==x", where x can be:

C for Cone NAT

S for Symmetric NAT

P for Pending a response from Echo Server 1

U for Unknown, response from Echo Server 1, but none from Echo Server

Behind NAT, but unsure if Cone or Symmetric.

Y for all telephones that are "C,S, and U"

N for all telephones that are not behind NAT

<blank> for all telephones that are not behind NAT

"RegType" is not currently accepted as an opcode.

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 503 504

Comentários a estes Manuais

Sem comentários

Cadence Flash F200-2 Guia de Resolução de Problemas Página 160

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores aúdio para automóveis Cadence Flash F200-2