Cadence Flash F200-2 Guia de Resolução de Problemas descarregar pdf (Página 230)

100

101

230 VoIP

10.1.1.1 5100 0x03a88098 10.1.1.2 5000 ESTABLISHED <-> 44

1730 81

10.1.1.1 5100 0x035919d0 10.1.1.3 5000 ESTABLISHED <-> 13

1679 79

0.0.0.0 15001 0x039befe8 192.168.1.200 15000 DUDP 0 0 0

192.168.1.201 15000 0x039c0c90 192.168.1.200 15000

ESTABLISHED <-> 10820 538 1

value =0=0x0

RUDPStatShow

Syntax:

RUDPStatShow "source"

Display the information received from the IP endpoint, including number of

messages sent, number of messages received and number of retries. Run

this command from the VGMC> prompt.

The parameter source is the IP address or TN of the telephone being

requested to provide the UNIStim/RUDP statistics.

The following example shows the RUDP/UNIStim statistic report output.

RUDP/UNIStim Statistic Report from Set (47.11.215.153)

Messages sent: 309

Messages received: 321

Number of retries: 10

Uptime of current TPS registration: 2 hour 24 minutes 35

seconds

Note: Uptime is not cleared even if parameter clear is set in the

command sent from Signaling Server/ VGMC to the telephone.

RUDPStatShow

Syntax:

RUDPStatShow "source", "clear"

Clear the UNIStim/RUDP statistics counts when clear is assigned a value

of 1. The uptime of Current TPS Registration is not cleared whether clear

is assigned a value of 1 or not.

-> RUDPStatShow "47.11.213.216"

value = 247379504 = 0xebeb630

RUDPStatShow Report from set (47.11.213.216):

Number of Message Sent: 4878

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 503 504

Comentários a estes Manuais

Sem comentários

Cadence Flash F200-2 Guia de Resolução de Problemas Página 230

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores aúdio para automóveis Cadence Flash F200-2