Cadence Flash F200-2 Guia de Resolução de Problemas descarregar pdf (Página 232)

100

101

232 VoIP

Store all necessary information in the VGMC or MC32S card NVRAM so

that on reboot the card starts up as a Leader 0. This command is not

available on the Signaling Server. The parameter IPaddr is the card ELAN

IP address, gwIPaddr is the ELAN gateway IP address and subnetMask

is the ELAN subnet mask. This command sets the Leader flag and the

BOOTP flag to retrieve the IP information from the NVRAM instead of

sending a BOOTP request.

VGMC> setLeader "192.168.1.14","192.168.1.1","255.255.25

5.128"

IP address : 192.168.1.14

Gateway : 192.168.1.1

Subnet Mask: 255.255.255.128

Set as Leader.

Set to use IP address parameters in NVRAM.

Settings will take effect on card reboot.

value = 43 = 0x2b = ’+’

shellTimeoutDisable

Syntax:

shellTimeoutDisable

Keep the shell from timing out and allow unlimited access. This command

is only available on the VGMC.

-> shellTimeoutDisable value = 0 = 0x0

shellTimeoutEnable

Syntax:

shellTimeoutEnable

Restore the timeout function of the shell. The actual duration of the

timeout can be assigned using the shellTimeoutSet command. This

command is only available on the VGMC.

-> shellTimeoutEnable value = 0 = 0x0

shellTimeoutGet

Syntax:

Display the currently configured idle shell timeout value in seconds. This

command is only available on the VGMC.

-> shellTimeoutGet value = 1200 = 0x4b0

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 503 504

Comentários a estes Manuais

Sem comentários

Cadence Flash F200-2 Guia de Resolução de Problemas Página 232

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores aúdio para automóveis Cadence Flash F200-2