Cadence Flash F200-2 Guia de Resolução de Problemas descarregar pdf (Página 401)

100

101

File details 401

the [TlanConfig] section) still require a card reboot before the changes can

take effect. You can change the following sections without performing a

reboot:

• [snmp]

• [routes]

• [dsp0]

•

[tos]

• [ElanConfig]

• [Loss Plan]

• [firmware]

You can download the file through the VGMC shell by using the command

configFileGet.

Starting in Release 4.0, the following line is examined and compared

between the copy of the CONFIG.IN file stored on the Call Server and the

copy stored locally on the Signaling Server or VGMC:

#dateOfLastFileModification(dd/mm/yyyy hh:mm:ss)=21/08/2

003 01:45:12 i.

If the line is different, then the CONFIG.INI file on the Call Server is used.

The configuration file is self-explanatory. Each section begins with a

section identifier in brackets ([]).

Note: The [routes] section is for creating static route entries on the

ELAN interface only. The entry includes the destination IP address

and the subnet mask.

EM file

The following is an example of a CONFIG.INI file generated by the

Succession 4.0 Element Manager.

#version=VGMC4.0

#authoringApplication=EM

#dateOfLastFileModification(dd/mm/yyyy hh:mm:ss)=21/08/2

003 01:45:12

[keycode]

keycodeId=12345678-12345678-12345678

[Security]

ElanAccessOnly=0

[snmp]

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 396 397 398 399 400 401 402 403 404 405 406 ... 503 504

Comentários a estes Manuais

Sem comentários

Cadence Flash F200-2 Guia de Resolução de Problemas Página 401

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores aúdio para automóveis Cadence Flash F200-2