Cadence Flash F200-2 Guia de Resolução de Problemas Página 170

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 169
170 VoIP
Modify the SCPW from the VGMC application rather than from the CS
1000. Enter the IP Phone public IP address or TN and the new SCPW as
the command parameters.
->isetScpwModify "147.11.215.136","6100"
value =0=0x0
-> 22/01/04 15:23:45 LOG0006 SET: SCPW Modify Status (tn
61-1): OK
isetSecGet
Use this command to obtain a list of IP phones based on a given
query. The command uses one input parameter that is an ascii string
representation of a set of expressions linked by &&. (Logically “And”ed
together) Each expression consists of three parts: opcode1, operator and
opcode2. Currently, only the following operators are handled: ==, !=, <, >,
<=, and >=. Also, opcode1 must be one of the fields in the isetSecShow
command output, and opcode2 must be a well-formatted value. (Format
depends on opcode1) Note; opcode1 and opcode2 are not case-sensitive.
There are four types for opcode1:
TN
IP
Encryption: For the expression Encryption==x, x can be:
INSEC: for insecure registered IP Phones
USEC: for UNIStim secure registered IP Phones
DTLS: for DTLS registered IP Phones
DTLSCap: For the expression DTLSCap==x, x can be:
YES: for DTLS-capable IP Phones
NO: for DTLS-nonCapable IP Phones
Syntax:
isetSecGet <queryString>
[nortel@bvw0 ~]$ isetSecGet “DTLSCap == Yes && Encryption
== DTLS”
=== TPS ===
IP Address Type Set-TN Encryption Action DTLS Cap.
------------------ ---------- ------------- ------------
-------- ----------
192.168.34.194 1140 096-00-00-29 DTLS 7 YES
192.168.34.195 1210 096-00-00-30 DTLS 7 YES
Nortel Communication Server 1000
Troubleshooting Guide for Distributors
NN43001-730 02.02 31 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
.
Vista de página 169
1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 503 504

Comentários a estes Manuais

Sem comentários