Cadence Flash F200-2 Guia de Resolução de Problemas Página 231

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 230
VoIP command reference 231
Number of Message Received: 114977
Number of Retries: 4404
Number of Resets: 26
Uptime of Current TPS Registration: 0days 0hours 54minutes
34seconds
serialNumShow
Syntax:
serialNumShow
Display the VGMC serial number data.
-> serialNumShow
Serial Number = NNTM1017213N 200023
Example output on Signaling Server:
-> serialNumShow
No serial number support.
value = 26 = 0x1a
setClocks
Syntax:
setClocks yyyy, mm, dd, hh, mm, ss
Assign the time for the VGMC or MC32S realtime clock chip (RTC) and
the VxWorks OS clock. The time and date is downloaded to Meridian 1
systems, or from the CS 1000. This command can be useful to remotely
log on to a card on a Meridian 1 system. You must configure the time and
date to a specific value be able to synchronize trace information. On CS
1000 systems, the time and data on the VGMC and Signaling Servers
should already be synchronized with the CS 1000.
The VGMC application takes the time from the VxWorks OS clock.
Normally that clock initializes from the RTC when the card boots up, when
EM downloads the time (on the Leader card), or when the SNTP response
returns the time (on the Follower card). This command updates them both
to the date and time entered by using the parameters yyyy, mm, dd, hh,
mm, ss.
-> setClocks 2001,02,12,16,38,30
value =0=0x0
setLeader
Syntax:
setLeader "IPaddr","gwIPaddr","subnetMask"
Nortel Communication Server 1000
Troubleshooting Guide for Distributors
NN43001-730 02.02 31 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
.
Vista de página 230
1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 503 504

Comentários a estes Manuais

Sem comentários