
VoIP command reference 233
shellTimeoutSet
Syntax:
shellTimeoutSet timeout
Assign the VGMC idle shell timeout value in seconds. This command is
not available on the Signaling Server. The valid range for timeout is 30 to
4095. The default timeout is 1200 (20 minutes). The value is persistent: it
is stored in NVRAM. The new timeout value takes effect immediately.
-> shellTimeoutSet 30 value = 0 = 0x0
showMemConfig
Syntax:
showMemConfig
Display the size of the VGMC DRAM memory. This command is not
available on the Signaling Server. Can be executed from the BIOS or
VxWorks shells.
-> showMemConfig Memory Configuration: Bank0: 64MB value
= 0 = 0x0
sockShow
Syntax:
sockShow
Display a list of sockets in use.
The following example is from an ITG-P card.
-> sockShow
5 TCP AF_UNSPEC 0.0.0.0 : 21
6 TCP AF_UNSPEC 0.0.0.0 : 23
7 TCP AF_UNSPEC 0.0.0.0 : 1009
9 UDP AF_UNSPEC 0.0.0.0 : 69
10 UDP AF_UNSPEC 0.0.0.0 : 111
11 TCP AF_UNSPEC 0.0.0.0 : 111
12 UDP AF_UNSPEC 192.168.1.14 : 161
17 UDP AF_UNSPEC 0.0.0.0 : 67
19 UDP AF_UNSPEC 0.0.0.0 : 20000
21 UDP AF_UNSPEC 0.0.0.0 : 514
31 TCP AF_UNSPEC 0.0.0.0 : 1006
32 UDP AF_UNSPEC 0.0.0.0 : 15001
33 UDP AF_UNSPEC 192.168.1.14 : 15000
35 UDP AF_UNSPEC 0.0.0.0 : 16550
42 UDP AF_UNSPEC 192.168.1.140 : 7300
43 UDP AF_UNSPEC 0.0.0.0 : 16540
Nortel Communication Server 1000
Troubleshooting Guide for Distributors
NN43001-730 02.02 31 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
.
Comentários a estes Manuais