Cadence Flash F200-2 Guia de Resolução de Problemas Página 270

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 269
270 VoIP
2983
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, silence_packet_count
=0
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, min_jitter = 18
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, max_jitter = 22
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, rtp_average_jitter =
0
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, tx_grant_sync_drop =
0
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, tx_octets = 477280
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, rx_octets = 476640
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, aal2_cod_prof_chgs =
0
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, dtmf_tx_octets = 0
JAN 01 14:33:39 tMVX_DIM: Info TCID 0, dtmf_rx_octets = 0
tsm_stat_req_tele_levels
Syntax:
tsm_stat_req_tele_levels chNum
Return the current audio levels measured in the DSP for the specified
gateway channel. This command applies only to the VGMCs. Receive
(RX) and Transmit (TX) are from the VGMC perspective. Transmit (TX)
means towards the TDM and Receive (RX) means from it. The following
data is displayed:
Receive (RX) power in 0.1 dBm units
Transmit (TX) power in 0.1 dBm units
Receive (RX) mean in 0.1 linear PCM units (ignore, apparently is not
accurate)
Transmit (TX) mean in 0.1 linear PCM units (ignore, apparently is not
accurate)
You can repeat the query for the duration of the call. The counts are reset
at the beginning of the next call.
The following table describes the command parameters.
Table 70
Command parameters
Parameter Value Description
chNum
Channel number of the call on the VGMC.
-> tsm_stat_req_tele_levels 0
value =0=0x0
->
Nortel Communication Server 1000
Troubleshooting Guide for Distributors
NN43001-730 02.02 31 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
.
Vista de página 269
1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 503 504

Comentários a estes Manuais

Sem comentários